Characterization, Physical Properties, and Biocompatibility of Novel Tricalcium Silicate-Chitosan Endodontic Sealer.

OBJECTIVE: The purpose of this study was to compare the characteristics, physical properties, and biocompatibility of the novel tricalcium silicate-chitosan (TCS-C) sealer with AH Plus and Sure-Seal Root. MATERIALS AND METHODS: The TCS-C powder was prepared by mixing tricalcium silicate with 2% water-soluble chitosan at a 5:1 ratio, followed by sufficient addition of 10 g/mL ratio of double-distilled water to form a homogeneous cement. Material characterizations (the Fourier Transform InfraRed [FTIR] and X-ray diffraction [XRD]), physical property investigations (flow and film thickness), and cytotoxicity tests in 3T3 mouse embryo fibroblast cell (MTT assay method) were performed on sealers, and the results were compared with those of the commercial products. STATISTICAL ANALYSIS: Statistical analysis was performed on flow and film thickness. The normality of the data was tested using the Shapiro-Wilk test. Statistical analysis was performed with one-way analysis of variance (ANOVA). The level of significance was set at p < 0.05. RESULTS: The TCS-C showed a mean flow of 31.98 ± 0.68 mm, compared with Sure Seal Root at 26.38 ± 0.69 mm and AH Plus at 26.50 ± 0.12 mm. The TCS-C showed a mean film thickness of 60 ± 10.0 mm compared with Sure-Seal Root at 50 ± 10.0 mm and AH Plus at 40 ± 15.8 mm. The TCS-C exhibited low to no cytotoxicity in fibroblast cell at all concentrations and exposure times. CONCLUSION: Adding water-soluble chitosan may improve the physical and biologic properties of tricalcium silicate cement. The novel TCS-C sealer did not fully meet the physical properties of an endodontic sealer, but it was not cytotoxic to fibroblast cells.

Characterization of Novel Cement-Based Carboxymethyl Chitosan/Amorphous Calcium Phosphate.

OBJECTIVE: This study aimed to analyze, evaluate, and characterize novel cement-based carboxymethyl chitosan/amorphous calcium phosphate (CMC/ACP). MATERIALS AND METHODS: The three cement groups studied were gypsum (Gyp), and CMC/ACP-gypsum cement-based 5% (5% CAG) and 10% (10% CAG). The groups were characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), setting time, and scanning electron microscopy (SEM) data. The characterization results were analyzed qualitatively, but the data for setting time were analyzed using SPSS (p < 0.05). STATISTICAL ANALYSIS: Data were statistically analyzed. One-way analysis of variance was used to compare numerical (parametric) data between more than two separate groups followed by post hoc Tukey. RESULTS: FTIR showed phosphate groups indicate the presence of calcium phosphate in the form of amorphous (ACP) in the CMC/ACP, CMC/ACP post-milled powder, and CMC/ACP cement-based (5% CAG and 10% CAG). XRD showed no difference in the diffraction spectra among the Gyp, 5% CAG, and 10% CAG groups. SEM images revealed that the CMC/ACP cement-based groups (5% CAG and 10% CAG) showed CMC/ACP cluster filled with hollow spaces between the gypsum crystals and aggregations surrounding the gypsum crystals. The CMC/ACP showed envelopes and attached to the crystalline structures of the gypsum. Setting times of 5% CAG and 10% CAG showed significant differences compared with Gyp (p < 0.05). CONCLUSION: The result of our study showed that CMC/ACP cement-based (5% CAG and 10% CAG) demonstrated amorphous characteristic, which can stabilize calcium ions and phosphate group (ACP). In addition, the modification of gypsum using CMC/ACP as cement-based extended the time of setting.